Cyberstorage for Federal Systems Integrators and government contractors
The Defense Industrial Base runs on data it cannot afford to lose — CUI, classified program data, and the intellectual property behind every contract. BrickStor SP protects that data, aligns to CMMC, isolates programs on shared infrastructure, and supports the Zero Trust and accreditation objectives your government customers require.
DIB contractors carry the government's data — and the government's risk
Federal Systems Integrators and government contractors hold some of the most sensitive unstructured data outside the government itself — Controlled Unclassified Information, classified program data, and the technical IP behind every bid and every delivery. That data is a primary target for ransomware, insider threats, and nation-state exfiltration.
At the same time, the contractual bar keeps rising: CMMC certification, DoW Zero Trust objectives, and the accreditation requirements attached to government-funded and classified projects. And most integrators are not running one program — they are running many, often for different government customers, on infrastructure that has to keep them separated.
BrickStor SP is built for exactly that: protect the data, prove the controls, isolate the programs, and do it on a platform that is fast to field and simple to operate.
For your infrastructure — and for what you deliver
Protect the CUI and classified data you hold
Federal Systems Integrators and government contractors handle Controlled Unclassified Information and, often, classified data across every contract. BrickStor SP protects that data with inline Active Defense, ABAC, immutable audit, FIPS 140-3 encryption, and surgical recovery — and aligns directly with the CMMC controls your assessors will ask about.
See CMMC alignment →Sell BrickStor through to your government customers
BrickStor SP is a Cyberstorage platform you can integrate into the solutions you deliver to federal agencies and Department of War (DoW, formerly DoD) programs. Bring a U.S.-built, patented data-defense platform to your government customers — strengthening your proposal, your past performance, and the security posture of what you field.
Become a partner →Run many government programs on one secured platform
ABAC and MLS are what make BrickStor SP valuable to a systems integrator. One platform can serve multiple government customers and government-funded projects — isolating data across programs, and expunging it cleanly when a contract closes.
One platform, many programs
Run a single BrickStor SP estate and support multiple government customers and government-funded projects on it. ABAC enforces access on every file operation; MLS and MCS enforce classification-level and category separation at the storage layer — so projects share infrastructure without sharing data exposure.
Security isolation across projects
Each program, contract, or tenant is isolated by policy enforced inside the storage — not by trusting a directory ACL or a separate cluster boundary. One integrator can host many programs and prove, to an auditor, that Program A data is unreachable from Program B.
Crypto-erase at project completion
When a contract ends and data must be expunged, FIPS 140-3 crypto-erase functions — compliant with NIST media purge standards — render the data unrecoverable. Close out a project cleanly and provably, without decommissioning shared hardware.
Lower cost and TCO
BrickStor SP is quick to deploy and simple to manage from Hub Central — one console across the estate. Consolidating multiple programs onto one secured platform, instead of standing up an enclave per contract, reduces hardware footprint, accreditation effort, and total cost of ownership.
What BrickStor SP delivers to the DIB
ABAC and MLS isolate government customers and projects on shared infrastructure.
Direct control alignment for the systems where CUI lives.
Data-centric zero trust — policy evaluated on every operation at the data layer.
STIG-aligned, FIPS 140-3, audit evidence built in — for government-funded and classified projects.
Meet DoW Zero Trust objectives and support your ATOs
Government-funded and classified projects come with Zero Trust mandates and accreditation requirements. BrickStor SP is engineered to help you meet them at the data layer.
- Data Centric Zero Trust Architecture — every SMB, NFS, S3, and Web operation evaluated against policy inline, with no implicit trust.
- ABAC enforcement on clearance, program, nationality, device, network, and context — the controls DoW Zero Trust extends to the data pillar.
- STIG-aligned hardened configuration and FIPS 140-3 validated cryptography reduce the custom engineering effort each accreditation cycle would otherwise require.
- Immutable, exportable audit and continuous-monitoring telemetry feed straight into the evidence an ISSO needs to achieve and maintain an Authorization to Operate.
- Continuous accreditation posture — signed software releases, tracked CVE remediation, and audit continuity keep authorization current rather than decaying after sign-off.
CMMC Level 2 and Level 3 — control by control
See exactly how BrickStor SP aligns with the CMMC controls an assessor will ask about — across Access Control, Audit and Accountability, Identification and Authentication, Incident Response, Media Protection, and more.
Explore CMMC ComplianceMore for federal and defense missions
Frequently asked questions
- Yes. ABAC enforces access policy on every file operation, and MLS / MCS enforce classification-level and category separation at the storage layer. A single integrator can host multiple government customers and government-funded projects on shared infrastructure, with each program cryptographically and policy-isolated from the others — and can prove that isolation to an assessor.
- Both. RackTop sells to Federal Systems Integrators for their own infrastructure — protecting the CUI and classified data they hold and supporting their CMMC obligations. RackTop also sells through FSIs as a Cyberstorage solution they integrate into what they deliver to their government customers. The channel partner program supports both models.
- BrickStor SP supports FIPS 140-3 crypto-erase functions compliant with NIST media purge standards. When a project completes and its data must be expunged, the data can be rendered unrecoverable — allowing a clean, provable project closeout without decommissioning shared hardware that other programs still use.
- BrickStor SP implements a Data Centric Zero Trust Architecture — every file operation is evaluated against ABAC policy inline at the storage layer, with no implicit trust. This is precisely the data pillar that the Department of War (DoW) Zero Trust Strategy extends zero trust into.
- Yes. STIG-aligned hardened defaults, FIPS 140-3 validated cryptography, immutable audit, and continuous-monitoring telemetry reduce the custom engineering effort an accreditation cycle requires and produce the evidence an ISSO needs — supporting faster initial ATO and a continuous-accreditation posture for government-funded and classified projects.
- BrickStor SP is quick to deploy and simple to operate from a single Hub Central console. Consolidating multiple programs onto one secured, multi-tenant platform — instead of an enclave per contract — reduces hardware footprint, operational staffing, and accreditation effort, which lowers total cost of ownership.
Protect the Data Behind Every Contract
Talk to a RackTop federal mission engineer about protecting CUI, isolating programs on shared infrastructure, and meeting the CMMC, Zero Trust, and accreditation requirements your government customers demand.